Adaptive Zone-Based Inventory Framework using Self-Supervised Learning for Cost-Efficient Restocking in the Food and Beverage Industry

Authors

  • Anindya Annisa Agung Institut Teknologi Sumatera
  • Juniwati Institut Teknologi Sumatera
  • Intan Mardiono Institut Teknologi Sumatera
  • Yu-Chieh Wang National Central University

DOI:

https://doi.org/10.9744/jti.27.2.225-236

Keywords:

Food and beverage service industry, Inventory management, K-means Clustering, Decision Tree

Abstract

The food and beverage service industry operates under high demand volatility, requiring inventory systems that are both adaptive and cost-efficient. A central challenge is maintaining product availability without excessive inventory that inflates costs. The objective of this study is to develop a data-driven restocking framework that improves cost efficiency while accounting for real operational constraints. The proposed method integrates K-Means clustering with a decision tree to generate interpretable, rule-based stock recommendations. K-Means clustering was applied as an unsupervised approach to group items into risk-based zones (Green, Yellow, Red), which were then used as labels in a supervised Decision Tree model. The model achieved 99% accuracy and an F1-score of 0.93. When applied to real industry data, it reduced Total Inventory Cost (TIC) by up to 16.9% compared with the company's MOQ-based policy while preserving stable service performance. These findings demonstrate that combining clustering and rule-based machine learning provides a practical, cost-efficient, and interpretable solution for optimizing restocking decisions in complex operational environments.

Downloads

Download data is not yet available.

Author Biographies

  • Anindya Annisa Agung, Institut Teknologi Sumatera

    Industrial Engineering Study Program, Institut Teknologi Sumatera. Jl. Terusan Ryacudu, Desa Way Hui, Kecamatan Jatiagung, Lampung Selatan 35365, Indonesia.

  • Juniwati, Institut Teknologi Sumatera

    Industrial Engineering Study Program, Institut Teknologi Sumatera. Jl. Terusan Ryacudu, Desa Way Hui, Kecamatan Jatiagung, Lampung Selatan 35365, Indonesia.

  • Intan Mardiono, Institut Teknologi Sumatera

    Industrial Engineering Study Program, Institut Teknologi Sumatera. Jl. Terusan Ryacudu, Desa Way Hui, Kecamatan Jatiagung, Lampung Selatan 35365, Indonesia.

  • Yu-Chieh Wang, National Central University

    Department of Mechanical Engineering, National Central University. No. 300, Zhongda Rd, Zhongli District, Taoyuan City, Taiwan 320217, Taiwan (R.O.C.)

References

BPS-Statistics, Badan Pusat Statistik, Statistik Penyediaan Makanan dan Minuman 2023, vol. 7, 2024. https://www.bps.go.id/id/publication/2024/12/23/f2c7743c4712aaeaa4abf694/statistik-penyediaan-makanan-dan-minuman-2023.html

U. Mehmood, J. Broderick, S. Davies, A. K. Bashir, and K. Rabie, "Machine learning-based predictive inventory for a vending machine warehouse," IEEE Internet of Things Magazine, vol. 7, no. 6, pp. 94-100, Nov. 2024. https://doi.org/10.1109/IOTM.001.2300271

D. Safitri, W. Tiswiyanti and F. Olimsar, "Comparative analysis of the financial performance of food and beverage," Management Studies and Entrepreneurship Journal, vol. 5, no. (2), pp. 7581-7595, 2023. https://journal.yrpipku.com/index.php/msej/article/download/5373/3055/29041

Y. A. M. ‘Ainul, M. J. Rosyid, V. A. Leksono and A. D. Wantira, "A preference-oriented multi-criteria decision model for stunting-prevention food basket ranking using AHP-TOPSIS," Jurnal Teknik Industri: Jurnal Keilmuan dan Aplikasi Teknik Industri, vol. 26, no. 2,pp. 145-156, 2024. https://doi.org/10.9744/jti.26.2.145-156

Y. Tan, L. Gu, S. Xu, and M. Li, "Supply chain inventory management from the perspective of 'cloud supply chain'—a data driven approach," Mathematics, vol. 12, no. 4, p. 573, 2024. https://doi.org/10.3390/math12040573

S. M. Mose and A. Osoro, "Inventory management practices and performance of food and beverage manufacturing firms in Kisumu City County, Kenya," Journal of Economics, Management Sciences & Procurement, vol. 4, 2025. https://www.jemspro.org/index.php/pages/article/view/52/63

S. D. Kırmızı, Z. Ceylan and S. Bulkan, "Enhancing inventory management through safety-stock strategies—a case study," System, vol. 12, no. 7, p. 260, 2024. https://doi.org/10.3390/systems12070260

I. G. P. Vergara, M. C. L. Gómez, I. L. Martínez and J. V. Hernández, "Strategies for the preservation of service levels in the inventory management during COVID-19: A case study in a company of biosafety products," Global Journal of Flexible Systems Management, vol. 22, pp. 65-80, 2021. https://doi.org/10.1007/s40171-021-00271-z

R. R. Panigrahi, A. K. Shrivastava and P. K. Kapur, "Impact of inventory management practices on the operational performances of SMEs: review and future research directions," International Journal of System Assurance Engineering and Management, vol. 15, pp. 1934-1955, 2024. https://doi.org/10.1007/s13198-023-02216-4

Achkar, V. G., Braulio, B. Héctor, P. R. M. Carlos, M. Ignacio and Grossmann, "Extensions to the guaranteed service model for industrial applications," European Journal of Operational Research, vol. 313, pp. 192-206, 2024. https://doi.org/10.1016/j.ejor.2023.08.013

C.-H. Chuang and C.-Y. Chiang, "Dynamic and stochastic behavior of coefficient of demand uncertainty incorporated with EOQ variables: An application in finished-goods inventory from General Motors׳ dealerships," International Journal of Production Economics, vol. 172, pp. 95-109, 2022. doi: https://doi.org/10.1016/j.ijpe.2015.10.019

M. Y. Jaber and J. Peltokorpi, "Economic order/production quantity (EOQ/EPQ) models with product recovery: A review of mathematical," Applied Mathematical Modelling, vol. 129, pp. 655-672, 2024. https://doi.org/10.1016/j.apm.2024.02.022

T. B. Abid, O. Ayadi and F. Masmoudi, "Enhancing apparel supply chain resilience: a robust-stochastic approach to integrated production-distribution planning," International Journal of Management Science and Engineering Management, vol. 20, no. 2, pp. 286-305, 2025. https://doi.org/10.1080/17509653.2025.2455962

S. Sivankutty and B. Elahi, "Proposing a new dynamic safety stock adjustment system: Balancing service level targets and financial constraints," in 9th North American Conference on Industrial Engineering and Operations Management, Washington D.C., USA, 2024. doi:https://doi.org/10.46254/NA09.20240162

Mandal, I. A. Mohammed and Joydeb, "The impact of lead time variability on supply chain management," International Journal of Supply Chain Management, vol. 8, no. 2,, pp. 41 - 55, 2023. doi:https://doi.org/10.47604/ijscm.3075

M. N. A. Z. Abidin, N. E. N. Bazin, D. A. Zebari, A. N. Rahmat and R. R. Asaad, "Inventory categorization using multiple criteria classification," Journal of Soft Computing and Data Mining, vol. 5, no. 1, pp. 142-151, 2024. doi: https://doi.org/10.30880/jscdm.2024.05.01.012

Z. Farshadfar, T. Mucha and K. Tanskanen, "Leveraging machine learning for advancing circular supply chains: A systematic literature review," Logistics, vol. 8, no. 4, 2024. https://doi.org/10.3390/logistics8040108

C. Wongoutong, "The impact of neglecting feature scaling in k-means clustering," PLOS ONE, vol. 19, p. 12, 2024. https://doi.org/10.1371/journal.pone.0310839

P. Liu, A. Hendalianpour, M. H. and M. Feylizadeh, "Cost reduction of inventory-production-system in multi-echelon supply chain using game theory and fuzzy demand forecasting," International Journal of Fuzzy Systems, vol. 24, pp. 1793-1813, 2022. https://doi.org/10.1007/s40815-021-01240-5

B. Naderalvojoud, C. M. Curtin, C. Yanover, T. El-Hay, B. Choi, R. W. Park, J. G. Tabuenca, M. P. Reeve, T. F. K. Humphreys and S. M. Asch, "Towards global model generalizability: Independent cross-site feature evaluation for patient-level risk prediction models using the OHDSI network," JAMIA, vol. 31, no. 5, pp. 1051-1061, 2024. doi: https://doi.org/10.1093/jamia/ocae028

Downloads

Published

2025-11-24

How to Cite

[1]
“Adaptive Zone-Based Inventory Framework using Self-Supervised Learning for Cost-Efficient Restocking in the Food and Beverage Industry”, J. Tek. Ind. J. Keilmuan dan Apl. Tek. Ind., vol. 27, no. 2, pp. 225–236, Nov. 2025, doi: 10.9744/jti.27.2.225-236.

Similar Articles

1-10 of 213

You may also start an advanced similarity search for this article.