Combined Waste Assessment Model and Fuzzy-FMEA in Lean Six Sigma for Generating Waste Reduction Strategy: A Proposed Model
:
https://doi.org/10.9744/jti.25.2.153-168
Keywords:
Lean Six sigma, Waste Assessment Model, Fuzzy-FMEA, WasteAbstract
Lean Six Sigma is a method that is quite effective in solving waste problems in the production process, but it is often not optimal because of the tools used in the DMAIC process. Therefore, we developed a proposed model by combining the Waste Assessment Model and Fuzzy-FMEA in Lean Six Sigma to reduce waste in the production process. The Waste Assessment Model was used at the defined stage to identify waste, while the Fuzzy-FMEA was used for priority waste risk analysis at the analysis stage. Based on the results of the Waste Assessment Model case study, defects were the most influential waste, with a percentage of 22.38%. At the analysis stage using Pareto diagrams, tearing was the dominant defect in the Nike Extreme. Based on calculations using the Fuzzy-FMEA method, the highest cause of defects was errors in processes or missed processes that caused the failure. Improvement was carried out at the improvement stage, and we found it necessary to carry out intensive and periodic control or supervision of the Nike Extreme production process. Based on these results, the proposed Lean Six Sigma model can be used to identify and reduce waste in the production process.
References
H. Parmar, F. Tucci, P. Carlone, and T. S. Sudarshan, "Metallisation of polymers and polymer matrix composites by cold spray: state of the art and research perspectives," International Materials Reviews Mater, vol. 67, no. 4, pp. 385-409, 2022. https://doi.org/10.1080/09506608.2021.1954805
R. Azwina, P. Wardani, F. Sitanggang, and P. R. Silalahi, "Strategi industri manufaktur dalam meningkatkan percepatan pertumbuhan ekonomi di indonesia," Jurnal Manajemen, Bisnis dan Akuntansi, vol. 2, no. 1, pp. 44-55, 2023. https://doi.org/10.58192/profit.v2i1.442
Sulistyarini, and E. Pebrianti, "Analisis pengawasan proses produksi dalam rangka meningkatkan mutu produk (Studi kasus pada UD. Bintang Antik Sejahtera di Tulungagung)," Jurnal Benefit, vol. 6, no. 1, pp. 11-22, 2019. https://journal.unita.ac.id/index.php/benefit/article/view/262
J. Theresia, I. G. A. Widyadana, and D. Wahjudi, "Optimal kiln dry allocation for dry timber preparation to minimize cost," Jurnal Teknik Industri: Jurnal Keilmuan dan Aplikasi Teknik Indusrti, vol. 21, no. 1, pp. 43-48, 2019. https://doi.org/10.9744/jti.21.1.43-48
D. S. Bowo, "Analisis perbaikan proses produksi pada Pt Sumber Teknik Sentosa," Jurnal Manajemen Bisnis, vol. 8, no. 1, pp. 19-28, 2018. https://doi.org/10.22219/jmb.v8i1.7049
M. Kholil, J. Haekal, A. Suparno, D. S. Oktaandhini, and T. Widodo, "Lean six sigma integration to reduce waste in tablet coating production with DMAIC and VSM approach in production lines of manufacturing companies," International Journal of Scientific Advances, vol. 2, no. 5, pp. 719-726, 2021. https://doi.org/10.51542/ijscia.v2i5.8
Ahmad, L. Gozali, and L. Widodo, "Analyze of mitigation waste in reconditioning process of iron drum with lean six sigma (Case study at PT Mulya Adhi Paramita)," in IOP Conference Series: Materials Science and Engineering (2019): 012071, 2019. https://iopscience.iop.org/article/10.1088/1757-899X/528/1/012071
M. Y. Gandi, A. E. Nugraha, A. H. Maksum, and B. Nugraha, "Identifikasi kecacatan produk menggunakan lean six sigma melalui pendekatan konsep DMAIC," Angkasa Jurnal Ilmiah Bidang Teknologi, vol. 14, no. 2, pp. 101-110, 2022. http://dx.doi.org/10.28989/angkasa.v14i2.1213
P. I. Piay, H. J. Kristina, and C. O. Doaly, "Pengurangan jumlah produk cacat pada produksi glasses box dengan metode lean six sigma," Jurnal Ilmiah Teknik Industri, vol. 9, no. 2, p. 81–92, 2021. https://doi.org/10.24912/jitiuntar.v9i2.12654
A. Ishak, K. Siregar, R. Ginting, and A. Manik, "The fuzzy failure mode and effect analysis (FMEA) method to improve roofing product’s quality (case study: XYZ Company)," In IOP Conference Series: Materials Science and Engineering, vol. 1003, no. 1, 2020. https://doi.org/10.1088/1757-899X/1003/1/012092
K. Siregar, A. Ishak, and S. Christin, "Quality control analysis with lean six sigma approach and weighted product method (case study: XYZ Company)," IOP Conference Series: Materials Science and Engineering, pp. 1-8, 2020. https://doi.org/10.1088/1757-899X/1003/1/012089
W. O. Widyarto, E. I. Yuslistyari, and L. Ekayani, "The analysis of waste in paving production process by using lean six sigma method," In 1st International Multidisciplinary Conference on Education, Technology, and Engineering (IMCETE 2019), vol. 410, pp. 222-225, 2020. https://doi.org/10.2991/assehr.k.200303.053
A. Munandar, and D. S. Permana, "Analisis waste produksi celana dengan metode lean six sigma pada area sewing line 5 di PT. XYZ," Jurnal Rekayasa Industri dan Mesin, vol. 1, no. 2, pp. 89-95, 2019. https://doi.org/10.32897/retims.2020.1.2.327
A. Adeodu, M. G. Kanakana-Katumba, and M. Rendani, "Implementation of lean six sigma for production process optimization in a paper production company," Journal of Industrial Engineering and Management, vol. 14, no. 3, pp. 661-680, 2021. http://dx.doi.org/10.3926/jiem.3479
F.-K. Wang, B. Rahardjo, and P. R. Rovira, "Lean six sigma with value stream mapping in industry 4.0 for human-centered workstation design," Sustainability, vol. 14, no. 17, pp. 1-19, 2022. https://doi.org/10.3390/su141711020
M. Wicaksono, L. D. Fathimahhayati, and Y. Sukmono, "Pengambilan keputusan dalam pemilihan supplier dengan metode analytical hierarchy process (AHP) dan technique for others reference by similarity to ideal solution (TOPSIS)," jtekno, vol. 17, no. 2, pp. 1-17, 2020. https://doi.org/10.33557/jtekno.v17i2.1078
L. Ouyang, Y. Che, L. Yan and C. Park, "Multiple perspectives on analyzing risk factors in FMEA," Computers in Industry, vol. 141, pp. 103712, 2022. https://doi.org/10.1016/j.compind.2022.103712
R. N. Dewi, "Occupational health and safety risk analysis using AS/NZS Standard 4360:2004 in a fish meatball industry," Jurnal Teknik Industri: Jurnal Keilmuan dan Aplikasi Teknik Industri, vol. 25, no. 1, pp. 31-42, 2023. https://doi.org/10.9744/jti.25.1.31-42
B. Sadeghi, M. Sodagari and H. Nematollahi, "FMEA and AHP methods in managing environmental risks in landfills: a case study of Kahrizak, Iran," Environmental Energy and Economic Research, vol. 5, no. 2, pp. 1-15, 2021. https://doi.org/10.22097/eeer.2020.253735.1172
R. S. Laali, "Analisis kecelakaan kerja pada bengkel bubut dan las Wijaya dengan metode job safety analysis (JSA) dengan pendekatan failure mode and effect analysis (FMEA); Syntax literate," Jurnal Ilmiah Indonesia, vol. 6, no. 4, pp. 1967-1976, 2021. https://doi.org/10.36418/syntax-literate.v6i4.2473
K. Kulsum and R. F. Rahman, "Identification and proposed strategy for minimizing defects using the lean six sigma method in the pallet production process," Jurnal Sains dan Teknologi, vol. 17, no. 1, p. 89–94, 2021. http://dx.doi.org/10.36055/tjst.v17i1.10942
P. Guleria, A. Pathania, R. K. Shukla, and S. Sharma, "Lean six-sigma: Panacea to reduce rejection in gear manufacturing industry," Materials Today: Proceedings, vol. 49, no. 6, pp. 4040-4046, 2021. https://doi.org/10.1016/j.matpr.2021.02.559
J. Saragih, I. Anne Marie, and A. D. Mubarani, "Increasing production performance with the use of lean six sigma methodology in a filing cabinet company," Journal of Modern Manufacturing Systems and Technology, vol. 5, no. 2, p. 106–119, 2021. https://doi.org/10.15282/jmmst.v5i2.6508
J. Robecca, I. M. A. Anthara, M. Silaban, and M. R. Situmorang, "Product quality improvement by using the waste assessment model and kipling method," In IOP Conference Series: Materials Science and Engineering, vol. 879, no. 1, p. 012172, 2020. https://doi.org/10.1088/1757-899X/879/1/012172
S. Hidayat, Marimin, Ani, Sukardi, and Mohamad Yani, "Model identifikasi risiko dan strategi peningkatan nilai tambah pada rantai pasok kelapa sawit," Jurnal Teknik Industri: Jurnal Keilmuan dan Aplikasi Teknik Industri, vol. 2, no. 89-96, p. 14, 2012. https://doi.org/10.9744/jti.14.2.89-96
Felecia, "Fuzzy logic reliability centered maintenance," Jurnal Teknik Industri: Jurnal Keilmuan dan Aplikasi Teknik Industri, vol. 16, no. 2, pp. 121-126, 2014. https://doi.org/10.9744/jti.16.2.121-126
R. Godina, R. S. Beatriz Gomes, and P. Espadinha-Cruz, "A DMAIC integrated fuzzy FMEA model: A case study in the automotive industry.," Applied Sciences, vol. 11, no. 8, p. 3726, 2021. https://doi.org/10.3390/ app11083726
H. Thakkar, V. Shah, H. Yagnik, and M. Shah, "Comparative anatomization of data mining and fuzzy logic techniques used in diabetes prognosis," Clinical eHealth, vol. 4, pp. 12-23, 2021. https://doi.org/10.1016/ j.ceh.2020.11.001
F. Pomalia, I. Iftadi, and R. D. Astu, "Waste analysis of fuselage assembly in panelization group of the 117th NC212i aircraft," Jurnal Sistem dan Manajemen Industri, vol. 4, no. 1, pp. 61-71, 2020. https://doi.org/10.30656/jsmi.v4i1.2187
A. S. Putri, and F. Primananda, "Quality control on minimizing defect product on 20 OE yarn," Jurnal Ilmiah Teknik Industri, vol. 20, no. 1, pp. 81-88, 2021. https://doi.org/10.23917/jiti.v20i1.12443
V. Gaspersz, Lean Six Sigma for Manufacturing and Service Industries, Jakarta: PT Gramedia Pustaka Utama, 2007.
D. Sjarifudin, H. Kurnia, H. H. Purba, and C. Jaqin, "Implementation of the six sigma approach for increasing the quality of formal men’s jackets in the garment industry," Jurnal Sistem dan Manajemen Industri, vol. 6, no. 1, pp. 33-44, 2022. https://doi.org/10.30656/jsmi.v6i1.4359
W. Atikno, and L. H. Kusumah, "Integration of FMEA method and overall equipment effectiveness to increase effectiveness of TS analyzer machine," Jurnal Sistem dan Manajemen Industri, vol. 6, no. 1, pp. 56-66, 2022. https://doi.org/10.30656/jsmi.v6i1.4368
E. Krisnaningsih, A. B. Sulistyo, A. Rahim, and S. Dwiyatno, "Fuzzy risk priority number assessment to detect midsole product defects," Jurnal Sistem dan Manajemen Industri, vol. 6, no. 1, pp. 77-88, 2022. https://doi.org/10.30656/jsmi.v6i1.4013
Downloads
Published
How to Cite
Issue
Section
License
Articles published in the Jurnal Teknik Industri: Jurnal Keilmuan dan Aplikasi Teknik Industri will be Open-Access articles distributed under the terms and conditions of the Creative Commons Attribution License (CC BY).
This work is licensed under a Creative Commons Attribution License (CC BY).
