The Urban Car Body Design for “Energy Efficient Car Contest 2019” using Quality Function Deployment

Authors

DOI:

https://doi.org/10.9744/jti.22.2.143-150

Keywords:

Design body, fluid flow simulation, KMHE, Solidworks 2016, urban-concept car

Abstract

The Muhammadiyah University of Surakarta team seeks to develop an urban-concept car to participate in the KMHE 2019. The KMHE (Energy Efficient Car Contest) is a competition for students to create safe, economical and environmentally friendly vehicles held by the Ministry of Research, Technology and Higher Education of the Republic of Indonesia. One of the most critical components of a car is the body. The body should be able to protect the driver, and its specifications affect the vehicle's performance. Thus, this research is performed to obtain a sound body design. In designing the body, a three-dimensional visual design modeling using Solidworks 2016 is performed. The specifications of the body are following the KMHE regulations. Afterwards, mass calculation and flow simulation are performed to evaluate the performance of the design. The results are the total body mass is 38.35 kg, and the airflow on the body surface is dominated by laminar flow.

Author Biography

Cindy Saraswati, Universitas Muhammadiyah Surakarta

Industrial Engineering, Engineering Faculty

References

Koto, A., and Asnawi, M., Analisis Tingkat Kepuasan Konsumen terhadap Kualitas Jasa Angkutan Bus Trans Metro Pekanbaru. 1, 2016, pp. 83–90, retrieved from http://digilib.mercubuana.ac.id/manager/t!@file_artikel_abstrak/Isi_Artikel_233515688261.pdf

Asmawi, A., Sjoraida, Diah F., and Anwar, Rully K., Masalah dan Dinamika Implementasi Kebijakan Publik tentang Transportasi Kajian di Kota Tasikmalaya, Jawa Barat, Jurnal Ilmu Pengetahuan, 3(2), 2017, pp. 205-218.

Dupont, L., Hubert, J., Guidat, C., and Camargo, M., Understanding User Representations, A New Development Path for Supporting Smart City Policy: Evaluation of The Electric Car Use in Lorraine Region, Technological Forecasting and Social Change, 2019, pp. 333 – 346.

Oktalihadi, V., and Hidayat, R., Analisis Tingkat Adopsi Teknologi Transportasi Online (Studi Kasus Gojek Padang Tahun 2018), E-Proceeding of Applied Science, 4(3), 2018, pp. 897-904.

Truong and Shimizu, The Effect of Transportation on Tourism Promotion: Literature Review on Application of The Computable General Equilibrium (CGE) Model. Department of Tourism Science, Tokyo Metropolitan University, 2016.

Ristiana, R., Arief S. R., Ary S. P., dan Carmadi M., Desain Kendali Optimal Konsumsi Energi Pada Sistem Mobil Listrik untuk Model Sistem Linier, Jurnal Telekomunikasi, Elektronika, Kom¬¬¬putasi, dan Kontrol, (4) 1, 2018, pp. 1-10.

Suryaningrat, M., Pengaruh Penggunaan Biosolar B20 dan Pertamina DEX terhadap Konsumsi Bahan Bakar dan Emisi Gas Buang pada Mesin Diesel 4JA1 Direct Injection, Skripsi Jurusan Teknik Mesin Fakultas Teknik Universitas Negeri Malang, 2019.

Kurniawan, D., Analisis Efisiensi Komposisi Bahan Bakar PLTU Batu Bara dengan Menggunakan Bat Algorithm pada PLTU Tanjung Awar-Awar Tuban, Thesis Program Studi Teknik Elektro Universitas Muhammadiyah Gresik, 2019.

Braithwaite, D., Soepraptono S., Gatot K. W., Herucokro T., Sugiharto S., Sutadi P. U., Pri A. R., Harga Sebuah Kebijakan Bahan Bakar Fosil: Subsidi Pemerintah Indonesia di Sektor Hulu Minyak & Gas Bumi. International Institute for Sustainable Development (IISD), 2010, retrieved from https://www.iisd.org/pdf/2010/ffs_awc_indonesia_execbahasa.pdf

Karmaker AK, Rahman MM, Hossain MA, Ahmed MR., Exploration and Corrective Mea-sures of Greenhouse Gas Emission from Fossil Fuel Power Stations for Bangladesh, Journal of Cleaner Production 244, 2020, pp. 118645.

Mawardi, I., Nurdin, A.., Usman, R., and Abdel HS., Peningkatan Karakteristik Biopellet Kayu Kelapa Sawit sebagai Sumber Energi Alternatif, Proceeding Seminar Nasional Negeri Lhokseumawe, (3) 1, 2019, pp. 230-234.

Cao, X., Yang, W., Yao, Y., Electric Car Design Based on Wheel Motor Drive, 7th International Forum on Industrial Design, 2019.

Sutisna, N.A.; Akbar, M.F.A.A., FEM Simulation of Electric Car Chassis Design with Torsional Bar Technology, Journal of Mechanical Engineering and Mechatronics, (3)2, 2018.

Thawafani, Lathiifah. Fajrin N.F., Cindy S., Fiki C.S., Hari P., Rancangan Ruang Kemudi Menggunakan Ilmu Ergonomi pada Prototype Mobil Listrik “Ababil”, The 8th University Research Colloquium, 2019, pp. 89-96.

Regulasi Teknis KMHE 2018, Ministry of Research, Technology and Higher Education of the Republic of Indonesia, 2018.

Ramdhanu, Arizky K., AND Supriono, Analisis Persepsi Kemanfaatan, Kemudahan, Kualitas, dan Harga Transportasi Online Sebagai Sarana Penunjang Aksesibilitas Wisatawan di Kota Malang, Jurnal Administrasi Bisnis, 60(2), 2018, pp 64-73.

Suhendra, Irfan., R., Angga., and Murtis, Muhammad A., Perancangan dan Implementasi Sistem Pengisian Baterai Otomatis pada Mobil Listrik Berbasis IoT, e-Proceeding of Engineering, 6(2), 2019, pp. 2835.

Li, Y. and Zhu, Hui., A Research on Electric Car Styling Design and Low Aerodynamic Drag, 7th International Forum on Industrial Design, 2019,

Wilberforce, T., El-Hassan, Z., Khatib, F. N., Al Makky, A., Baroutaji, A., Carton, J. G., and Olabi, A. G., Developments of Electric Cars and Fuel Cell Hydrogen Electric Cars, International Journal of Hydrogen Energy, 42(40), 2017, pp. 25695–25734.

Wicaksono, D.A., Korelasi Konstanta Kontrol Proportional Integral Derivative terhadap Kinerja Mobil Listrik Universitas Jember, Skripsi Program Studi Teknik Elektro Fakultas Teknik Universitas Jember, 2015.

Mardji, A., dan Prasetyo, D., Aerodynamics Analysis of Electric Car UM Body Surface Using Computational Fluid Dynamics, MATEC Web of Conferences 204, 2018.

Ulrich, K. T. dan Eppinger, S. D., Product Design and Development, 5th Edition. New York: McGraw-Hill Education, 2012.

Jhon S, Joshua S., and Utomo, T. S., Analisis Aerodinamika Body Mobil Hemat Energi Antawirya Residual-Sat dengan Mengunakan Metode Computational Fluid Dynamics, Jurnal Teknik Mesin, S01, 5(1), 2017, pp. 50-59.

Kotler, P., Manajemen Pemasaran Analisis Perencanaan Implementasi dan Kontrol. Jilid 1, Jakarta, PT. Prehalindo, 1997.

Hendrawan, M. Alfatih., Perancangan Chassis Mobil Listrik Prototype “Ababil” dan Simulasi Pembebanan Statik dengan Menggunakan Solidworks Premium 2016, The 7th University Research Colloquium, 2018.

PT. ARISMA DATA SETIA., Solidworks Flow Simulation, 2018.

Rosyidi, C. N., Model Penentuan Nilai Target Functional Requirement Berbasis Utilitas, Jurnal Teknik Industri, 14(1), 2012, pp. 35-42.

Widodo, I.J., Perencanaan dan Pengembangan Produk: Product Planning and Design. Yogyakarta: UII Press Yogyakarta, 2003.

Widodo, L, Silvi A., Fajar A. K., Perancangan Stasiun Kerja Ergonomis pada Stasiun Kerja Printing CV. Karya Mitra Lestari, Jurnal Ilmiah Teknik Industri, 6(1), 2018, pp. 29 – 34.

Falah, F.N, Adi, G.P., Saraswati, C., Prasetyo, H., and Djunaidi, M., Penetapan Spesifikasi Desain Body Composite Untuk Urban Concept Berdasarkan Regulasi Kontes Mobil Hemat Energi 2018 menggunakan Metode Quality Function Deployment (QFD), The 9th University Research Colloquium, 2020, pp. 1–7.

Cross, N., Engineering Design Methods, Stra-tegies for Product Design. John Wiley & Sons Ltd, Baffins Lane, Chichester, West Sussex PO19 IUD, England, 1994.

Hou, S., Wen, H., Feng, S., Wang, H., and Li, Z., Application of Layered Coding Genetic Algorithm in Optimization of Unequal Area Production Facilities Layout, Computational Intelligence and Neuroscience, 2019, pp. 1-17.

Downloads

Published

2020-12-11