An Approach to Combine House of Quality and Finite Element Method in Redesigning of Rotary Shaft Multi-Spindle Wheel Nutrunner Machine
Keywords:
Redesign, House of Quality, Finite Element, SolidWorks, rotary shaftAbstract
An engineering-to-order company has developed multi-spindle wheel nutrunner machines for automotive wheel mounting. The rotating shaft component that supports that machine has experienced compressive and twisting stress during operation, resulting in damage not only to the shaft but also some parts attached to the wheel. This study uses the house of quality (HOQ) and finite element method (FEM) approaches to redesign the rotary shaft to meet quality standards for its engineers, as customers, in a systematic way by using qualitative data from interviews, documents, and questionnaires provided by five rotary shaft engineering experts. Based on the importance levels of technical specifications obtained from the HOQ results, two rotary shaft redesign models for the redesigned models 1 and 2 obtain the maximum von Mises stress from the virtual testing using FEM analysis of 277.5 MPa and 111.8 MPa, respectively, which are below the company standard maximum yield strength of 470 MPa. Hence, using the company's minimum safety factor, the redesigned model 2 is chosen for the improved version of rotary shaft design
References
A. Saxena and B. Sahay, Computer aided engineering design, First. India: Anamaya Publisher, 2005.
D. Maritan, Practical manual of Quality Function Deployment, First. Heidelberg: Springer Cham, 2015. doi: 10.1007/978-3-319-08521-0.
A. Prasad, R. Jadhav, T. Kasireddi, and P. Pawar, “Re-designing of hair clipper using design for manufacturing and assembly,” Journal of Applied Research in Technology & Engineering, vol. 4, no. 1, pp. 25–36, Jan. 2023, doi: 10.4995/jarte.2023.18810.
S. Pruthvi, R. Keval, P. Harsh, P. Dhaval, M. Pankajkumar, and M. Bhaumik Bhandari, “Multi nut remover,” Journal of Emerging Technologies and Innovative Research (JETIR), vol. 8, no. 5, 2021, [Online]. Available: www.jetir.orgd962
A. J. Nugroho, E. Kusumaningsih, F. Yuamita, and A. Y. Pradana, “Redesign n metal casting tools using anthro-pometry and QFD,” International Journal of Engineering, Technology, and Natural Science, vol. 1, no. 2, 2019.
S. N. M. Kumar, K. B. K. Reddy, K. M. Kumar, and D. V. Rao, “Design & fabrication of multi nut removing and tightening tool for a car wheel,” International Journal of Innovative Technology and Research, vol. 6, no. 1, pp. 7848–7851, 2018, [Online]. Available: http://www.ijitr.com
A. Thakkar and R. R. Arakerimath, “FEM based life enhancement of linear motion shaft guide way with four spindle multi dc nut runner for accurate torque output,” Journal of Modern Engineering Research, vol. 6, no. 2, 2016, Accessed: Nov. 27, 2023. [Online]. Available: www.ijmer.com
A. R. El-Nounu, A. Popov, and S. Ratchev, “Redesign methodology for mechanical assembly,” Research in Engineering Design, vol. 29, pp. 107–122, Jan. 2018, doi: 10.1007/s00163-017-0255-6.
M. A. Junaid, Y. Ahmed, M. A. Khan, and S. Hyder, “Design and fabrication of car wheel multi nut remover,” International Journal of Research in Aeronautical and Mechanical Engineering, vol. 7, no. 5, pp. 01–09, 2019.
N. Siller, S. Werner, V. Molina, and D. Göhlich, “Method for potential assessment and adaptation for additive manufacturing of conventionally manufactured components,” Research in Engineering Design, 2023, doi: 10.1007/s00163-023-00421-7.
S. Human Maulana, A. I. Rifai, and M. Isradi, “The horizontal curved geometric redesign on Jalan Kayu Api Kuala Penaso, Riau using the Autocad civil 3D method,” Indonesian Journal of Multidisciplinary Science, vol. 1, no. 1, 2022.
F. A. C. da Silva and P. M. S. T. de Castro, “Redesign of a failed hoisting shaft of a vertical transfer device,” Eng, vol. 4, no. 3, pp. 1981–2002, Sep. 2023, doi: 10.3390/eng4030112.
Z. Murčinková, P. Adamčík, and J. Živčák, “Re-design of machine tool joint components based on polymer fillings for high-speed performance,” Materials, vol. 14, no. 22, Nov. 2021, doi: 10.3390/ma14226913.
H. Y. Razzaq, H. M. Hasan, and K. R. Abbas, “Machine design modern techniques and innovative technologies,” in Journal of Physics: Conference Series, IOP Publishing Ltd, May 2021. doi: 10.1088/1742-6596/1897/1/012072.
Sumiyanto and H. Achyadi, “Redesign leak test machine for part cover comp head,” International Journal of Advanced Multidisciplinary, vol. 1, no. 4, 2023, doi: 10.38035/ijam.v1i4.
G. Mohankumar, K. Abin, K. Akhil, I. V Akshay, and J. A. Varghese, “Design and fabrication of vehicles multi wheel nuts tighter and remover,” International Journal for Research in Mechanical & Civil Engineering, vol. 3, no. 4, 2017.
I. D. Febryanto and S. D. Kartikasari, “Perancangan mesin CNC Router 3 axis berbasiskan metode Quality Function Deployment (QFD),” Journal of Industrial Engineering and Management, vol. 17, no. 1, pp. 109–120, 2022.
T. A. Hawali, H. Rachmat, and D. S. E. Atmaja, “Usulan perancangan desain toolholder dengan meng¬gunakan metode pengembangan produk Quality Function Deployment,” Proceeding of Engineering, vol. 5, no. 2, pp. 3011–3021, 2018.
Moh. Imam and A. P. Budijono, “Pengembangan desain mesin pengering brem tipe hybrid dengan metode QFD (Quality Fungtion Deployment),” Jurnal Teknik Mesin, vol. 4, no. 03, pp. 81–90, 2016.
J. EL Mesbahi, I. Buj-Corral, and A. EL Mesbahi, “Use of the QFD method to redesign a new extrusion system for a printing machine for ceramics,” The International Journal of Advanced Manufacturing Technology, vol. 111, pp. 227–242, 2020, doi: 10.1007/s00170-020-05874-x/Published.
J. Yang, Q. Peng, J. Zhang, and P. Gu, “Design of a hand rehabilitation device using integrated axiomatic and benchmarking methods,” in Procedia CIRP, Elsevier B.V., 2018, pp. 295–300. doi: 10.1016/j.procir. 2018.09.064.
E. Mossali, L. Gentilini, G. Merati, and M. Colledani, “Methodology and application of electric vehicles battery packs redesign for circular economy,” in Procedia CIRP, Elsevier B.V., 2020, pp. 747–751. doi: 10.1016/j.procir.2020.01.139.
J. El Mesbahi, I. Buj-Corral, and A. El Mesbahi, “Use of the QFD method to redesign a new extrusion system for a printing machine for ceramics,” The International Journal of Advanced Manufacturing Technology, vol. 111, pp. 227–242, 2020, doi: https://doi.org/10.1007/s00170-020-05874-x.
W. C. Ho, A. W. Lee, S. J. Lee, and G. T. Lin, “The application of quality function deployment to smart watches-the house of quality for improved product design,” Journal of Scientific and Industrial Research (India), vol. 77, pp. 149–152, 2018.
J. Heizer and B. Render, Operations management, Tenth Edit. New Jersey: Pearson Education, Inc., 2011.
C. Anson, S. Tjitro, and S. Ongkodjojo, “Desain dan pembuatan alat penggiling daging dengan quality function deployment,” Jurnal Teknik Industri: Jurnal Keilmuan dan Aplikasi Teknik Industri, vol. 8, no. 2, pp. 106–113, 2006, doi: https://doi.org/10.9744/jti.8.2.106-113.
R. S. Russel and B. W. Taylor, Operationt management: Creating value along the supply chain, Seventh Ed. Hoboken: John Wiley and Sons, Inc., 2011.
T. Fadiji, C. J. Coetzee, T. M. Berry, A. Ambaw, and U. L. Opara, “The efficacy of finite element analysis (FEA) as a design tool for food packaging: A review,” Biosystems Engineering, vol. 174. Academic Press, pp. 20–40, Oct. 01, 2018. doi: 10.1016/j.biosystemseng.2018.06.015.
F. R. Pris, B. M. Suyitno, and A. Suhadi, “Analisis kekuatan velg aluminium alloy 17 inc dari berbagai desain menggunakan metode finite element analysis (FEA),” Jurnal Ilmiah TEKNOBIZ, vol. 9, no. 2, doi: https://doi.org/10.35814/teknobiz.v9i2.558.
A. Sasmito, “Disain kekuatan sambungan hoop pillar dan floor bearer pada struktur rangka bus menggunakan SolidWorks,” Simetris: Jurnal Teknik Mesin, Elektro dan Ilmu Komputer, vol. 9, no. 1, pp. 657–670, 2018, doi: 10.24176/simet.v9i1.2023.
M. Bengtsson, “How to plan and perform a qualitative study using content analysis,” NursingPlus Open, vol. 2, pp. 8–14, 2016, doi: 10.1016/j.npls.2016.01.001.
D. P. Andriani, M. Choiri, and FX. B. Desrianto, “Redesain produk berfokus pada customer requirements dengan integrasi axiomatic design dan house of quality,” Jurnal Ilmiah Teknik Industri, vol. 17, no. 1, p. 71, 2018, doi: 10.23917/jiti.v17i1.5867.
F. Ardani, D. Caesaron, and A. Kusnayat, “Design of flood barrier with developed iot-based flood detection and monitoring systems,” Jurnal Teknik Industri: Jurnal Keilmuan dan Aplikasi Teknik Industri, vol. 25, no. 2, pp. 111–120, Sep. 2023, doi: 10.9744/jti.25.2.111-120.
B. G. Dale, Managing quality, Fourth Edition. Cornwall: Blackwell Publishing Ltd, 2003.
F. Eka Setyaningrum, “Customer satisfaction index (CSI) and importance performance analysis (IPA) methods of exclusive matte lip cream,” Indonesian Journal of Industrial Engineering & Management, vol. 1, no. 2, pp. 116–126, 2020, [Online]. Available: http://publikasi.mercubuana.ac.id/index.php/ijiem
A. T. Suci, S. Waluyo, and Y. Syahrullah, “Redesain produk headphone berbahan baku kayu dengan House of Quality (HOQ) pada perempuan berhijab,” Tekinfo: Jurnal Ilmiah Teknik Industri dan Informasi, vol. 10, no. 1, pp. 29–43, Nov. 2021, doi: 10.31001/tekinfo.v10i1.909.
D. P. Andriani, M. Choiri, and FX. B. Desrianto, “Redesain produk berfokus pada customer requirements dengan integrasi axiomatic design dan House of Quality,” Jurnal Ilmiah Teknik Industri, vol. 17, no. 1, p. 71, 2018, doi: 10.23917/jiti.v17i1.5867.
L. A. N. Wibawa, “Desain dan analisis tegangan alat pengangkat roket kapasitas 10 ton menggunakan metode elemen hingga,” Jurnal Energi dan Teknologi Manufaktur (JETM), vol. 2, no. 01, pp. 23–26, Jun. 2019, doi: 10.33795/jetm.v2i01.31.
L. M. Gómez-López, V. Miguel, A. Martínez, J. Coello, and A. Calatayud, “Simulation and modeling of single point incremental forming processes within a SolidWorks environment,” in Procedia Engineering, Elsevier Ltd, 2013, pp. 632–641. doi: 10.1016/j.proeng.2013.08.253.
F. Ebnoether and D. Mohr, “Predicting ductile fracture of low carbon steel sheets: Stress-based versus mixed stress/strain-based Mohr-Coulomb model,” International Journal of Solids and Structures, vol. 50, no. 7–8, pp. 1055–1066, Apr. 2013, doi: 10.1016/j.ijsolstr.2012.11.026.
E. Desnica, M. Đurđev, B. Vaščić, R. Turmanidze, and P. Dašić, “Determination of a safety factor of a car wheel rim using finite element analysis in SolidWorks,” Applied Engineering Letters, vol. 7, no. 4, pp. 163–171, 2022, doi: 10.18485/aeletters.2022.7.4.4.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Ayu Anggraeni Sibarani, Sugeng Waluyo, Muhammad Baharuddin Wahid Tosalili
This work is licensed under a Creative Commons Attribution 4.0 International License.
Articles published in the Jurnal Teknik Industri: Jurnal Keilmuan dan Aplikasi Teknik Industri will be Open-Access articles distributed under the terms and conditions of the Creative Commons Attribution License (CC BY).
This work is licensed under a Creative Commons Attribution License (CC BY).
