Menuju manufaktur berkelanjutan di Indonesia: Tantangan dan Kesempatan

Authors

  • Jessica Hanafi Department of Industrial Engineering Faculty of Science and Technology Universitas Pelita Harapan

:

https://doi.org/10.9744/jti.17.2.123-132

Keywords:

Manufaktur Berkelanjutan, Life Cycle Assessment, Indikator Berkelanjutan, MP3EI

Abstract

Persaingan global mendorong Indonesia untuk memajukan ekonominya. Salah satu cara untuk menjawab tantangan  globalisasi ini adalah dengan menerapkan manufaktur berkelanjutan. Manufaktur berkelanjutan berawal dari manufaktur ramping, produksi bersih dan Life Cyle Assessment dengan memperhatikan keselamatan karyawan, konsumen dan masyarakat. Terdapat berbagai hambatan dalam implementasi manufaktur berkelanjutan. Indikator keberlanjutan suatu organisasi juga beragam, yang berdasar pada tiga aspek, yaitu ekonomi, sosial dan lingkungan. Pada makalah ini akan dibahas bagaimana isu manufaktur berkelanjutan akan dilihat dari ketiga perspektif, yaitu sisi industri, pemerintah dan akademia, khususnya di Indonesia.

References

US Environmental Protection Agency, “Sustainable Manufacturing,” Sustainable Manufacturing, 2015. [Online]. Available: http://www.epa.gov/sustainablemanufacturing/. [Accessed: 17-Aug-2015].

C. O’Brien, “Sustainable production–a new paradigm for a new millennium,” Int. J. Prod. Econ., vol. 60, pp. 1–7, 1999.

E. Westkämper, Alting, and Arndt, “Life Cycle Management and Assessment: Approaches and Visions Towards Sustainable Manufacturing (keynote paper),” CIRP Ann. - Manuf. Technol., vol. 49, no. 2, pp. 501–526, 2000.

S. H. Abdul Rashid, S. Evans, and P. Longhurst, “A comparison of four sustainable manufacturing strategies,” Int. J. Sustain. Eng., vol. 1, no. 3, pp. 214–229, 2008.

N. M. P. Bocken, S. W. Short, P. Rana, and S. Evans, “A literature and practice review to develop sustainable business model archetypes,” J. Clean. Prod., vol. 65, pp. 42–56, Feb. 2014.

C. Reich-Weiser, R. Simon, T. Fleschutz, C. Yuan, A. Vijayaraghavan, and H. Onsrud, “Metrics for Green Manufacturing,” in Green Manufacturing, D. A. Dornfeld, Ed. Springer US, 2013, pp. 49–81.

Y. Huang, J. Luo, and B. Xia, “Application of cleaner production as an important sustainable strategy in the ceramic tile plant – a case study in Guangzhou, China,” J. Clean. Prod., vol. 43, pp. 113–121, Mar. 2013.

B. Büyükbay, N. Ciliz, G. E. Goren, and A. Mammadov, “Cleaner production application as a sustainable production strategy, in a Turkish Printed Circuit Board Plant,” Resour. Conserv. Recycl., vol. 54, no. 10, pp. 744–751, Aug. 2010.

C. M. V. B. Almeida, S. H. Bonilla, B. F. Giannetti, and D. Huisingh, “Cleaner Production initiatives and challenges for a sustainable world: an introduction to this special volume,” J. Clean. Prod., vol. 47, pp. 1–10, May 2013.

B. van Hoof and T. P. Lyon, “Cleaner production in small firms taking part in Mexico’s Sustainable Supplier Program,” J. Clean. Prod., vol. 41, pp. 270–282, Feb. 2013.

K. Niinimäki and L. Hassi, “Emerging design strategies in sustainable production and consumption of textiles and clothing,” J. Clean. Prod., vol. 19, no. 16, pp. 1876–1883, Nov. 2011.

N. R. Khalili, S. Duecker, W. Ashton, and F. Chavez, “From cleaner production to sustainable development: the role of academia,” J. Clean. Prod., 2014.

J. M. Grutter and H.-P. Egler, “From cleaner production to sustainable industrial production modes,” J. Clean. Prod., vol. 12, no. 3, pp. 249–256, Apr. 2004.

V. Narayanaswamy and L. Stone, “From cleaner production to sustainable production and consumption in Australia and New Zealand: achievements, challenges, and opportunities,” J. Clean. Prod., vol. 15, no. 8–9, pp. 711–715, 2007.

D. Dornfeld, C. Yuan, N. Diaz, T. Zhang, and A. Vijayaraghavan, “Introduction to green manufacturing,” in Green Manufacturing, Springer, 2013, pp. 1–23.

J. B. Guinée, “Handbook on life cycle assessment operational guide to the ISO standards,” Int. J. Life Cycle Assess., vol. 7, no. 5, pp. 311–313, 2002.

International Standard Organisation, ISO 14040: Environmental Management - Life Cycle Assessment - Principles and Framework. 1997.

Life Cycle Initiatives, “Social Life Cycle Assessment (S-LCA) | Life Cycle Initiative,” 2015. [Online]. Available: http://www.lifecycleinitiative.org/starting-life-cycle-thinking/life-cycle-approaches/social-lca/. [Accessed: 19-Aug-2015].

UNEP-SETAC Life Cycle Initiative, “Guidelines for social life cycle assessment of products,” U. N. Environ. Programme ISBN, pp. 978–92, 2009.

Lowell Centre for Sustainable Production, “Lowell Center for Sustainable Production,” 2015. [Online]. Available: http://www.sustainableproduction.org/. [Accessed: 28-Jun-2015].

D. Krajnc and P. Glavič, “Indicators of sustainable production,” Clean Technol. Environ. Policy, vol. 5, no. 3–4, pp. 279–288, 2003.

L. Schneider and C. M. Wallenburg, “Implementing sustainable sourcing—Does purchasing need to change?,” J. Purch. Supply Manag., vol. 18, no. 4, pp. 243–257, Dec. 2012.

N. US Department of Commerce, “NIST Sustainable Manufacturing Indicators Repository (SMIR),” 05-Nov-2010. [Online]. Available: http://www.mel.nist.gov/msid/SMIR/index.html. [Accessed: 17-Aug-2015].

Kementerian Perindustrian Republik Indonesia, “Inventarisasi Gas Rumah Kaca,” 2015. [Online]. Available: http://grkindustri.kemenperin.go.id/. [Accessed: 19-Aug-2015].

Sekretariat PROPER Kementerian Lingkungan Hidup dan Kehutanan Republik Indonesia, “Program penilaian peringkat kinerja perusahaan dalam pengelolaan lingkungan (PROPER),” 2015. [Online]. Available: http://proper.menlh.go.id/portal/. [Accessed: 19-Aug-2015].

Kementerian ESDM Republik Indonesia, “Pemerintah Luncurkan Kompor Tungku Sehat - Kementerian ESDM Republik Indonesia,” Agustus-2014. [Online]. Available: http://ebtke.esdm.go.id/post/2014/08/14/648/pemerintah.luncurkan.kompor.tungku.sehat. [Accessed: 19-Aug-2015].

UNESCO, “UNESCO | Teaching and Learning for a Sustainable Future,” 2010. [Online]. Available: http://www.unesco.org/education/tlsf/. [Accessed: 19-Aug-2015].

UNESCO, “Education for Sustainable Development | Education | United Nations Educational, Scientific and Cultural Organization,” 2015. [Online]. Available: http://www.unesco.org/new/en/education/themes/leading-the-international-agenda/education-for-sustainable-development/. [Accessed: 19-Aug-2015].

Downloads

Published

2016-08-24

How to Cite

[1]
J. Hanafi, “Menuju manufaktur berkelanjutan di Indonesia: Tantangan dan Kesempatan”, Jurnal Teknik Industri: Jurnal Keilmuan dan Aplikasi Teknik Industri, vol. 17, no. 2, pp. 123-132, Aug. 2016.